HDPE Molds Forms For Epoxy Resin River Tables & Charcuterie Boards

Forget cumbersome and leaking wood and tuck tape molds, or HDPE molds that you need to take apart and reseal with each pour. Our no-seal formed one piece LDPE / HDPE molds are created just for makers, resin artists and woodworkers. Our time saving one piece molds will never leak, don't require sealing and will significantly cut down on the setup and de-molding time of charcuterie boards, small table tops and resin artwork that is usually involved with other types of forms. 

These are a true one piece mold, molded out of one piece of plastic, NEVER welded. There are no seams, or weak points. These HDPE plastic (polyethylene) molds are a lower cost than our silicone mold offerings, and available in larger sizes, but are more ideal for wood and resin work where the piece will be trimmed and planed after demolding. Due to the natural internal stresses of formed polyethylene the interior of these molds are never 100% flat (typically off by 1/32-1/16") and the corners and sides have larger radiuses to allow for forming. Neither of these are an issue when you are going to trim the sides of your piece, and run it through a planer to flatten it anyway, which is usually not done with "resin art" resin-only pours. Like our silicone molds they will never come apart and will never leak, but allow us to offer our customers larger forms that have functionality similar to our silicone molds.