$107 USD
Interior Size: | 14.5x14.5x0.5" |
Fluid Volume: |
Each Square = 0.25oz Total Squares (64) = 16oz / 475ml Base = 35oz / 1035ml Lines Backfill = 6oz / 175ml Grand Total = 57 oz / 1685ml |
Wall Thickness: | 1/2" |
Material: | Platinum Cure Silicone - Shore 30A |
Interior Finish: | Polished / Shiny |
Looking for a high quality, durable and deep chessboard mold but don't want to use one of our full size chessboard molds? The medium sized, 14.5x14.x5x0.5" chessboard mold is 1/2" deep and features full size 1.5x1.5" squares that are 0.2" in depth. At nearly 3.6lbs in weight, it uses 5X times the amount of silicone used in the common small and thin, Chinese made, chessboard molds found on Amazon or Etsy.
With 1.5x1.5" squares separated by 1/8" lines, both 0.2" in depth, you can create solid, thick squares with ease using alternating resin, concrete or Jesmonite colors. Once your small squares are set, you can then pour an additional layer (which will end up being the base of the chessboard) to solidify all the squares and surrounding border together. The total thickness of the finished cast board is 1/2".
Once you demold this piece, you can leave the separating lines unfilled, fill them with your choice of resin, or sand then flood coat your entire finished chess / checkers board.
If you are looking for a chess board mold you can cast objects, flowers, or even wood into, check out the 18x18x1.5" Deep Chess Board mold with 1.75" squares that we also offer. If you need something bigger, the 19x19x0.5" chess board mold with 2" squares might be worth a review.
We do not currently carry any chess player / chess piece molds. However, our medium sized chessboard mold is appropriately sized to pair with most chess player / chess piece molds from Amazon or Etsy.
The last mold you will ever need. Created just for makers, resin artists and wood workers, these time saving flexible yet durable silicone molds significantly cut down on the setup and demolding time usually involved with other molds. Silicone molds are superior to wood and tuck tape, and HDPE molds because: