19x19x0.5" Full Size Chess Board Silicone Mold With 2" Squares
SKUCE-MOLD-SILIH-19X19X0.5-GAME-CHESS1
Original price$151 USD
-
Original price$151 USD
Original price$151 USD
$151 USD
$151 USD
-
$151 USD
Current price$151 USD
| /
$128 USD ⬅️ 15% Off Labor Day Sale
USE CODE 'LABORDAY15' AT CHECKOUT 🚚 FREE SHIPPING. SHIPS WITHIN 2 DAYS.*
Interior Size:
19x19x0.5"
Fluid Volume:
Each Square = 0.44oz Total Squares (64) = 28oz / 828ml Base = 62oz / 1833ml Lines Backfill = 10oz / 295ml Grand Total = 100 oz / 2956ml
Wall Thickness:
1/2"
Material:
Platinum Cure Silicone - Shore 30A
Interior Finish:
Polished / Shiny
This is possibly the worlds first full size, competition specification chess board silicone mold. This massive 19x19" mold is 1/2" deep and features full size 2x2" squares that are 0.2" in depth. At nearly 6lbs in weight, it uses 7-10 times the amount of silicone used in the common small and thin, Chinese made, chess board molds found on Amazon or Etsy.
With full size 2x2" squares separated by 1/8" lines, both 0.2" in depth, you can create solid, thick squares with ease using alternating resin, concrete or Jesmonite colors. Once your small squares are set, you can then pour an additional layer (which will end up being the base of the chessboard) to solidify all the squares and surrounding border together. The total thickness of the finished cast board is 1/2".
Once you demold this piece, you can leave the separating lines unfilled, fill them with your choice of resin, or sand then flood coat your entire finished chess / checkers board.
We do not currently carry any chess player / chess piece molds. However, we recommend the large 3D printed chess pieces crafted by Spectra 3D Technologies.
Crafted Elements Silicone Molds
The last mold you will ever need. Created just for makers, resin artists and wood workers, these time saving flexible yet durable silicone molds significantly cut down on the setup and demolding time usually involved with other molds. Silicone molds are superior to wood and tuck tape, and HDPE molds because:
They can be used with epoxy resin, resin and wood, concrete, Jesmonite, plaster and more.
They never need assembled, or disassembled. Saving huge amounts of time.
The strength and flexibility of the molds allows you to insert and remove pieces of wood easily.
The corners and edges never need sealed.
When using wood, the wood stays in place, tight in the mold if you cut it 1/16" larger than the width of the mold. Alternatively use our HDPE block kit in conjunction with hand weights or clamps to keep your wood from up in your resin. The HDPE blocks dont stick to set resin and are easily and cleanly removed.
The mold is heat resistant to ~450F. Avoid direct contact with the flame of a torch. Briskly wave your torch or use a heat gun to pop bubbles.
The molds are reusable. However silicone molds do have a finite lifespan when used with epoxy resin, but getting 20-30+ castings out of the mold can be expected when they are properly cared for and a non-silicone based mold release spray is used. The Mann Ease Release 300 and the MG Chemicals 8329 (Amazon) is what we most recommend.
Like HDPE, epoxy resin does not stick to silicone. However, the heat generated by the exothermic reaction and the chemicals in epoxy resin are very harsh to all silicone molds. Additionally, if part of your epoxy has not fully set due to improper mixing, the epoxy can become bonded to the mold. Both of these factors can lead to mold tear out when removing your piece from the mold, leading to pits and tears on the surface of the mold. This is why we a non-silicone based mold release spray is required before each pour. To help prevent tear out and to increase the life of your mold. We use the 'MG Chemicals 8329 Non-Silicone Epoxy Mold Release', 'Mann Ease Release 200' or 'Mann Ease Release 300'. Cooking spray, vaseline, silicone based sprays or sprays designed for urethane or polyester products should NEVER be used. Using a proper, non-silicone based mold release can mean the difference between getting only a couple of uses from your mold to 20, 30 or more.
I’ve purchased many silicone molds this mold is by far the best quality by 100%.
I was a little hesitant in purchasing the chessboard mold, as the freight to get it to me in Australia was a little high, but let’s face it freight is always expensive.
I do not regret purchasing.
The mold is extremely well made … it arrived unbelievably quick & extremely well packaged for its journey.
I haven’t started the resin chessboard yet, but am looking forward to using it
I definitely recommend this Seller & will most definitely purchase from this Seller again
`YOUR MOLDS ARE AWESOME. I have not used it yet. It is made of good quality. I WILL BE RETURNING TO PURCHASE MORE. WISH YOU HAD THE CHESS PIECE MOLDS TO GO WITH THIS LARGE CHESS BOARD. THANK YOU
Fantastic to be able to make a full sized board and having the opportunity to offer personalisation to as the squares are large enough to get a decent graphic on. Great mould!
Using Total Boat Makers Poxy and following all the directions and information I gained from your YouTube videos, my first chess board came out great! Your molds are very easy to use.
This large chessboard mold is just perfect. It saves me at least an hour per board. This is one of these rare occasions. Where in America you actually get what you pay for I will definitely purchase this again.
Love Love Love the quality of my mold! Excellent! Nothing like those flimsy warped mold you buy on “A”! I was so impressed with the Chessboard, that I bought another size and a Tic Tac board!
I had a smaller size chess board with the letters of Maryland teams and crabs for the pawns and immediately realized it wasn’t gonna work when I laid the the pieces on the board. So…we go big! We don’t go home.it turned out beautifully and honestly easier to fill than that of competitors.
This was my first attempt at any resin work! The chess board mold is very well made. Everything looked great after completing. Learned lessons though. More pigment in the white so the under color doesn’t show through. Use a thickset for the back and not an art resin. Mine was thick and had a couple small spots that were not mixed well so were gummy. Looking forward to trying it again!
I bought a chessboard mold off Amazon to make a board for a friend. The process of using it was frustrating because of the shallow depth of the mold. Took 3 tries to make a board that I would be happy with. The board was too small for his chess pieces, so I ordered one from Crafted Elements. The board was easy make and is beautiful. I only have a picture on my phone and not the computer so I can't send it to you.
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
