Canadian Flag Mold - 16x8x0.75" - Canada Silicone Mold
$68 USD ⬅️ 20% Off With Code BFCM
🚚 FREE SHIPPING. SHIPS WITHIN 2 DAYS.*
| Interior Size: | 16x8x0.75" |
| Fluid Volume: |
53oz / 1567 ml (8.2oz center background, 44.8oz leaf and sides) |
| Wall Thickness: | ~1/2" |
| Material: | Platinum Cure Silicone - Shore 30A |
| Interior Finish: | Polished / Shiny |
Create beautiful and iconic Canadian flags out of epoxy resin, Jesmonite, concrete or even chocolate using this 16x8x0.75" Canada flag silicone mold. This mold is designed with separation lines 0.15" wide and 3/8" in depth between each component of the flag to allow you to pour multiple epoxy colors without the risk of mixing.
Creating a finished flag with this mold with multiple colors is a multi-step process. First fill the two sides, middle and maple leaf up to 3/8" in depth. Once the epoxy is set, join all of the pieces together with a backer layer of resin. Once the 2nd (backer) layer is set. Demold!
Crafted Elements Resin / Soap / Candy / Chocolate (RSCC) Silicone Molds
Our RSCC line of silicone molds are crafted with artists, makers and bakers in mind. While RSCC stands for resin, soap, candy and chocolate they can also be used with plaster, acrylic resin/Jesonite, concrete and other popular pourable materials.
These are not your run of the mill $10 mass produced and imported molds you'll find on many shopping sites. The custom tooling (blanks) and silicone molds are all made one-by-one, by hand at our facility in Ontario, Canada. We use the highest grade platinum cure silicone, which surpasses the quality and standards of regular food grade silicone. Our silicone is cured with platinum, not peroxide making it safer for use in food and medical applications. We make our molds incredibly thick, to ensure they are self supporting and won't bend or deform when full of your material. Every artist, maker or baker who gets one of our molds immediately acknowledges the quality difference and can justify the cost difference.
Please remember that if you are using silicone molds with epoxy resin or other corrosive or abrasive chemical that you need to use a mold release before pouring your resin. We recommend a non-silicone based release such as the MG Chemicals 8329 or Mann Ease Release 200/300. Using a proper release will extend the life of your mold and help to prevent mold tear-out.