- Router Sleds
- Sale & Clearance
||80oz / 2360ml
|Material:||Platinum Cure Silicone - Shore 30A|
|Interior Finish:||Polished / Shiny|
This 6x6x4" block mold is perfect for casting items such as flowers, rocks, and other memorabilia into resin up to 4" thick. It can also be used with wood and resin to create a small serving tray or other epoxy resin artwork.
Note that due to the stiffness of the silicone, demolding a piece of this height can be challenging. There are two ways to remove castings from this mold as peeling back the mold significantly will likely result in tearing.
1. Pouring distilled water between the cured resin piece and the interior wall of the mold and moving the water around the resin casting before trying to attempt to remove it from the mold.
2. Using a compressed air hose with a soft (plastic or rubber) gun nozzle end. Insert your air gun in between the casting and the mold wall and scale up the air flow rate until the casting rises from the mold.
The last mold you will ever need. Created just for makers, resin artists and wood workers, these time saving flexible yet durable silicone molds significantly cut down on the setup and demolding time usually involved with other molds. Silicone molds are superior to wood and tuck tape, and HDPE molds because: