6.7x5.6x0.6" Jesus Corpus Silicone Mold
🚚 SHIPS WITHIN 2 DAYS.*
Interior Size: | 6.7x5.6x0.6" |
Fluid Volume: |
1.4oz / 40ml |
Wall Thickness: | 1/4" |
Material: | Platinum Cure Silicone - Shore 30A |
Interior Finish: | Polished / Shiny |
Cross making molds, templates and wood blanks are popular items here at Crafted Elements. However, what if you wanted to create a crucifix? Crucifix = A cross + Jesus' body. Enter our Jesus corpus mold, the easiest way to cast solid resin Jesus corpuses for mounting on your finished crosses.
The size of the castings out of this mold make it appropriately scaled for our 12x6 crosses and our 15x8 flared crosses (available as molds, templates and blanks). We do not recommend using this with our larger cross making products as the scale would be off.
Just cast your piece in this mold using your favorite resin, then attach it to your finished cross with superglue / hot glue or resin to create complete crucifixes.
==> Check out our entire line of cross and crucifix making products here.
Crafted Elements Resin / Soap / Candy / Chocolate (RSCC) Silicone Molds
Our RSCC line of silicone molds are crafted with artists, makers and bakers in mind. While RSCC stands for resin, soap, candy and chocolate they can also be used with plaster, acrylic resin/Jesonite, concrete and other popular pourable materials.
These are not your run of the mill $10 mass produced and imported molds you'll find on many shopping sites. The custom tooling (blanks) and silicone molds are all made one-by-one, by hand at our facility in Ontario, Canada. We use the highest grade platinum cure silicone, which surpasses the quality and standards of regular food grade silicone. Our silicone is cured with platinum, not peroxide making it safer for use in food and medical applications. We make our molds incredibly thick, to ensure they are self supporting and won't bend or deform when full of your material. Every artist, maker or baker who gets one of our molds immediately acknowledges the quality difference and can justify the cost difference.
Please remember that if you are using silicone molds with epoxy resin or other corrosive or abrasive chemical that you need to use a mold release before pouring your resin. We recommend a non-silicone based release such as the MG Chemicals 8329 or Mann Ease Release 200/300. Using a proper release will extend the life of your mold and help to prevent mold tear-out.