20x10x1" Cross Silicone Mold For Epoxy Resin - Large Cross Mold
SKUCE-MOLD-SILIH-20X10X1-CROSS
Original price$90 USD
-
Original price$90 USD
Original price$90 USD
$90 USD
$90 USD
-
$90 USD
Current price$90 USD
| /
🚚 SHIPS WITHIN 2 DAYS.*
Interior Size:
20x10x1" - 2.5" Wide Body
Fluid Volume:
38oz / 1126ml
Wall Thickness:
1/2"
Material:
Platinum Cure Silicone - Shore 30A
Interior Finish:
Polished / Shiny
This 20" high x 10" wide cross mold is 1" deep and features a 2.5" wide body. It can be used with wood and resin, concrete, plaster or solely resin. Check out the YouTube video below to see the creation of a resin and wood crucifix using the smaller 12x6x1" version of this silicone mold from start to finish.
This cross mold is part of our '20x10" Cross Fabrication System'
This mold is designed to accommodate our line of cross shaped acrylic templates. This allows you to create a solid epoxy resin, or wood and epoxy resin straight cross shaped "blank" using the mold, then refine its shape to something more unique using the collection of more ornately styled cross templates. There are a handful of cross templates within this system that fit within the dimensions of this mold. Click here to see our line of cross templates.
Crafted Elements Silicone Molds
The last mold you will ever need. Created just for makers, resin artists and wood workers, these time saving flexible yet durable silicone molds significantly cut down on the setup and demolding time usually involved with other molds. Silicone molds are superior to wood and tuck tape, and HDPE molds because:
They can be used with epoxy resin, resin and wood, concrete, Jesmonite, plaster and more.
They never need assembled, or disassembled. Saving huge amounts of time.
The strength and flexibility of the molds allows you to insert and remove pieces of wood easily.
The corners and edges never need sealed.
When using wood, the wood stays in place, tight in the mold if you cut it 1/16" larger than the width of the mold. Alternatively use our HDPE block kit in conjunction with hand weights or clamps to keep your wood from up in your resin. The HDPE blocks dont stick to set resin and are easily and cleanly removed.
The mold is heat resistant to ~450F. Avoid direct contact with the flame of a torch. Briskly wave your torch or use a heat gun to pop bubbles.
The molds are reusable. However silicone molds do have a finite lifespan when used with epoxy resin, but getting 20-30+ castings out of the mold can be expected when they are properly cared for and a non-silicone based mold release spray is used. The Mann Ease Release 300 and the MG Chemicals 8329 (Amazon) is what we most recommend.
Like HDPE, epoxy resin does not stick to silicone. However, the heat generated by the exothermic reaction and the chemicals in epoxy resin are very harsh to all silicone molds. Additionally, if part of your epoxy has not fully set due to improper mixing, the epoxy can become bonded to the mold. Both of these factors can lead to mold tear out when removing your piece from the mold, leading to pits and tears on the surface of the mold. This is why we a non-silicone based mold release spray is required before each pour. To help prevent tear out and to increase the life of your mold. We use the 'MG Chemicals 8329 Non-Silicone Epoxy Mold Release', 'Mann Ease Release 200' or 'Mann Ease Release 300'. Cooking spray, vaseline, silicone based sprays or sprays designed for urethane or polyester products should NEVER be used. Using a proper, non-silicone based mold release can mean the difference between getting only a couple of uses from your mold to 20, 30 or more.
I’ve looked at the mold many times and just couldn’t pull the trigger because of the price point. It is also the largest that I have found in my searches. It is very well made. Nice thick sturdy walls. It was packages very well and had I great deal of instructions.
Very pleasure with the product and its durability. Photos are just a few examples of projects made for family and friends.
Very good quality and great product to work with.Crafted Elements thank you for making this beautiful Cross mold, will be ordering more in the future 🥰
I am absolutely in love with the two cross molds that I got from you. I originally purchased the 12x6 mold and I liked it so much I turned around and also purchased the 20x10 and if you had a bigger one I would probably purchase that one too. They both have worked absolutely flawlessly !! Super happy !! I work for a church ministry so am not a man of means by any means .lol. so even though they are very reasonably priced it was still a large purchase for me.. I'm very happy, the money was very well spent. I live in Florida and to receive those the next day was amazing to me. Thank you for making such an amazing product!! Attached is a picture of my first attempts with some very inexpensive epoxy that was not very good but still got amazing results!!
Finally bit the bullet and made the purchase of the cross mold... so glad I did. Perfect time to make some amazing gifts for Christmas. Looking forward to playing with more wood and resin!
Oh MY!! This mold is amazing!! I just got it. I'm so excited and can't wait to use it!!! It looks sturdy and is even better than I expected!! I was planning on making my own out of melamine, but now I won't need to. I'm glad I discovered this company!
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
