Small but mighty, this little drilling jig will save you time! This incredibly easy to use jig makes pre-drilling holes for rubber/plastic cutting board feet a breeze. Forget wasting time measuring each corner offset with a tape or ruler to get your positioning just right, our 'Corner Feet Drilling Jig' features a series of diagonally offset holes at 0.5", 0.75", 1.0", 1.5", 2.0", 2.5" and 3.0" to make drilling for cutting board feet a dream. Use the hole pattern with a pen or pencil to mark the holes on your board or simply drill through the holes in the jig directly with your drill bit.
The 7/64" holes in the jig are ideal for a 7/64" drill bit or less. If you use thicker screws with your cutting board feet feel free to use a 1/8" drill bit to initially drill out the holes in the jig to a slightly larger diameter. The larger hole at the corner opposite the alignment tabs is big enough to allow it to hang on most tool board hooks, because we all know how small gadgets like to get lost around the shop!
This jig will also work with cutting boards and serving boards that have a corner radius of up to 2".
While this jig isn't saving anyone hours, it will save you boring and monotonous minutes of time from marking or drilling holes for raised feet. Dare we say that this jig makes attaching cutting board feet great again? :-P
Note: While the jig is shown in black in the photos, the color you will receive is dependent on the materials currently available in our production facility. As a general rule you can expect black, gray or blue.
Customer Reviews
Overall rating: 4.8 / 5 from 232 reviews.
Great product!
Jordan R.5/5Verified
So simple but saved so much time
Takes the guess work out of measuring left and right top and bottom.
Place in the corner. Select your placement, Pilot hole … done!
Michael D.5/5Verified
I make a lot of chop blocks and cutting boards this is the best tool for accurate placement!!!
Nick C.5/5Verified
Perfect feet location every time and multiple possible llcstiknd
Timothy S.5/5Verified
This jig makes adding footers soooooo much easier. No guessing and be no measurements. This saves lots of time and is simple use. I love it!
Amelia M.5/5Verified
Very accurate
Robert B.5/5Verified
Thank you for checking… I’ve not yet had an opportunity to use the products I purchased, but as I do, it appears I’ll be better prepared to succeed!
James B.4/5Verified
Absolutely love. Cut my marking and drilling time down to nothing
Tracy D.5/5Verified
Makes getting the feet in the right place a lot easier.
Scott W.5/5Verified
I know it’s not a standard use, but the smaller holes work on round pieces also. Depending on the radius of your piece, the smaller holes can still be used for exact placement. I think the 4 smaller holes were usable here. It would work well for feet placement also. It makes an easy to mess up project easy to complete. When I make a project and am in the last few processes, I will use anything to help make it easier.
Dave B.5/5Verified
Just makes it easy and hassle free
Essa M.5/5Verified
All products from Crafted Elements have been excellent, templates, guides etc… outstanding.
Aaron A.5/5Verified
So accurate
Derek F.5/5Verified
Great product. Allows you to place the feet precisely in the same location time after time.
Mark C.5/5Verified
Handy jig
Richard M.5/5Verified
Just what I needed
Jay L.5/5Verified
Spot on!
Michael D.5/5Verified
love it, it makes drilling easier and precise
Thomas G.5/5Verified
All I can say is this tool is very cool 😎.
Tom B.5/5Verified
This jig is absolutely an awesome. It takes the work out of measuring
Duane B.5/5Verified
terrific, easy and convenient.
Lawrence K.5/5Verified
Great for cutting boards feet placement
Randy K.5/5Verified
makes it easy!
Lee F.5/5Verified
Love This! Use it weekly!!
Jerry L.5/5Verified
Works excellent
William E.5/5Verified
Just what I needed to make my feet for my cutting boards
Mario S.5/5Verified
Was able to accurately mount these feet so that all four were perfectly placed!
John B.5/5Verified
Love it, so easy to use, takes the guess work out.
John J.5/5Verified
Worked out great and made my cutting board feet consistently uniform
Irl A.5/5Verified
Great little jig. I have already used it several times and it is extremely useful. Makes drilling pilot holes in my charcuterie boards very easy.
Kevin V.5/5Verified
Sinple and efficient. Great company to do business with.
Jeff W.5/5Verified
great idea
Scott R.5/5Verified
Used it to install these feet on this display board. Worked well.
Jim R.5/5Verified
Very helpful tool
Mark H.5/5Verified
Great little jig. Does as it should for correct placement of feet.
Jay B.5/5Verified
I haven’t even used it yet. But it looks like it will work fine.
Brian G.5/5Verified
Makes adding precise foot locations so much easier.
Rob H.5/5Verified
Fantastic tool.
Juan G.5/5Verified
Again it’s a little pricey but it sure speeds things up.
Mark C.5/5Verified
Great tool for a good price and quick delivery, as usual!!
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
