- Router Sleds
|38oz / 1140ml
|Platinum Cure Silicone - Shore 30A
|Polished / Shiny
Aloha! Introducing the super-sized Hawaiian Islands mold. Featuring the major Hawaiian islands in correct distance and proportions from one another, surrounded by nothing but pure ocean. This is a unique two tiered mold. The islands are 1/4" thick and make up the lower tier. The ocean / open area is also 1/4" thick, making up the upper tier. Combined the piece from this mold is 1/2" thick should you choose to pour both tiers. You can also use this mold to cast the islands and remove them, creating different Hawaiian themed artwork, jewelry, trinkets and more!
The finished casting out of this mold is 16x12" and 1/2" thick when filling both tiers of the mold.
If you create ocean and beached themed art then this is the quintessential mold for your next creation!
Our RSCC line of silicone molds are crafted with artists, makers and bakers in mind. While RSCC stands for resin, soap, candy and chocolate they can also be used with plaster, acrylic resin/Jesonite, concrete and other popular pourable materials.
These are not your run of the mill $10 mass produced and imported molds you'll find on many shopping sites. The custom tooling (blanks) and silicone molds are all made one-by-one, by hand at our facility in Ontario, Canada. We use the highest grade platinum cure silicone, which surpasses the quality and standards of regular food grade silicone. Our silicone is cured with platinum, not peroxide making it safer for use in food and medical applications. We make our molds incredibly thick, to ensure they are self supporting and won't bend or deform when full of your material. Every artist, maker or baker who gets one of our molds immediately acknowledges the quality difference and can justify the cost difference.
Please remember that if you are using silicone molds with epoxy resin or other corrosive or abrasive chemical that you need to use a mold release before pouring your resin. We recommend a non-silicone based release such as the MG Chemicals 8329 or Mann Ease Release 200/300. Using a proper release will extend the life of your mold and help to prevent mold tear-out.