- Router Sleds
||240oz / 7080ml
|Material:||Platinum Cure Silicone - Shore 30A
|Interior Finish:||Polished / Shiny|
The 24x12x1.5" mold is one of the largest silicone molds we currently offer, and is ideal for oversized charcuterie and serving boards, bedside tables, and other large format resin art.
This mold differs slightly from the lower cost, 24x12x1.5" Shore 40A silicone mold we offer as it is made in house, and has a completely polished/shiny interior so your resin comes out looking as glass like as possible.
Multi-Size Capability With Our Optional 12x6x1.5" Spacer Block
With the release of our super-high-tech-revolutionary 12x6x1.5" HDPE plastic block (yes, we are being sarcastic) you can turn your 24x12x1.5" silicone mold into an 18x12x1.5" mold. The HDPE block acts as a solid filler that sits within the mold to one side. Place your wood and resin in the balance of the mold, then demold as usual. The HDPE block can be knocked off your cured resin with little effort, then used again for the next pour.
You can also use this block as a middle spacer to create two smaller boards. For example, place this block in the middle of the 24x12x1.5" mold, and you'll have two 12x9x1.5" voids that you can fill to make two small serving boards at once.
Add the 24x12x1.5" mold to your cart then head here to grab the 12x6x1.5" HDPE spacer block.
The last mold you will ever need. Created just for makers, resin artists and wood workers, these time saving flexible yet durable silicone molds significantly cut down on the setup and demolding time usually involved with other molds. Silicone molds are superior to wood and tuck tape, and HDPE molds because: